Red Wolf Associates personnel have prepared, reviewed, and managed engineering analysis or training for over half of the of the US nuclear fleet as well as numerous Combined Operating License Applications. A sample list of recent Red Wolf Associates projects includes:
- Appendix R control room heat up analysis using GOTHIC™
- Fire and component thermal lag modeling in support of NFPA 805
- BWR drywell penetration EQ shielded dose analyses for plant life extension
- Secondary containment positive pressure period / drawdown analysis using GOTHIC™
- Intermediate building heat-up analysis to support operator response to fires using GOTHIC™
- Long-term post-LOCA secondary containment heat up analysis with GOTHIC™
- Updating of temperature response analyses for Diesel Buildings, ECCS pump rooms, and other areas of PWR and BWR facilities with GOTHIC™
- Benchmarked and evaluated cooling coil performance and water-side system response to assess the impact of various postulated equipment and sensor deficiencies/failures on system performance utilizing GOTHIC™
- Sump pH and sodium tetraborate dissolution analysis for a PWR
- Development of an ABWR short-term containment analysis
- RCIC steam exhaust water hammer and piping loads analysis
- Evaluation of vortexing and NPSH during VCT to RWST swapover
- Three-dimensional HPCI room heat up due to HELB
- Evaluation of SGBT exhaust pipe condensation and drain system modification
- Containment spray additive tank vortexing and gas transport analysis
- Sprinkler and spray system hydraulic calculations for more than 30 sprinkler zones and spray systems
- Diesel building HVAC and transient heat up analysis
- Diesel building basement heat up analysis following SBO
- Service Water chemical additive system sparger design
- Spent fuel pool heat up to support refueling and SBO
- Duct stress overpressurization finite element analysis